MFI-1111 Melt Flow Indexer
MFI-1111 Melt Flow Indexer
Description: It is an affordable tabletop instrument that tests the melt mass-flow rate (MFR) of thermoplastic raw materials with low flow rate, in the form of granules, strips etc.
Test methods： MFR
Display mode: LED
Temperature range: 100℃～450℃
Temperature accuracy： ≤0.5℃
Weight accuracy： ±0.5％
E-mail： Ava@jinjian-test.com
jiaojj@jinjian-test.com
Test methods： MFR
Display mode: LED
Temperature range: 100℃～450℃
Temperature accuracy： ≤0.5℃
Weight accuracy： ±0.5％
E-mail： Ava@jinjian-test.com
jiaojj@jinjian-test.com
Features:
High performance and high accurate control gauge is used for temperature control and data sampling, fuzzy PID algorithm is adapted for constant temperature stability, with the features of fast heating rate, slight overshoot, high accurate at constant point.
Standard:
|
NO.
|
Standard description
|
|
ASTM D 1238-13
|
<<Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer>>
|
|
ISO 1133:2005
|
<<Plastics-Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics>>
|
parameters:
|
Model
|
MFI-1111
|
|
Test method
|
MFR
|
|
Display mode
|
LED
|
|
Cutting mode
|
Manually
|
|
Flow rate measuring range
|
0.1～100g/10min 0.01～350m³/10min
|
|
Temperature range
|
100℃～450℃
|
|
Temperature accuracy
|
±0.5℃
|
|
Temperature resolution
|
0.1℃
|
|
Heating time
|
＜30min
|
|
Temperature recovery time
|
＜4 min
|
|
Weight loading
|
Manually
|
|
Time accuracy
|
0.01s
|
|
Power supply
|
（220-15％～220+10％ ）VAC 50Hz 500W , single phase and three wires
|