MFI-1211 Melt Flow Indexer
MFI-1211 Melt Flow Indexer
Description: It is an affordable tabletop instrument that tests the melt mass-flow rate (MFR) of a wide range of thermoplastic raw materials, in the form of granules, strips etc. The tester is far superior to all national and international standards of Melt Flow Rates requirements. This product has been CE certificated.
Test methods： MFR
Display mode: LCD
Temperature range: 100℃～450℃
E-mail： Ava@jinjian-test.com
jiaojj@jinjian-test.com
Temperature accuracy： ≤0.5℃
Weight accuracy： ±0.5％
E-mail： Ava@jinjian-test.com
jiaojj@jinjian-test.com
Features:
· LCD display the test result, micro printer may print out the MVR result.With the functions of test temperature display, upper limit protection and sound notification.
· Thanks to the advanced PID controller and high resolution sample circuit, the temperature can ramp up to the set point with slight overshoot and high accuracy in stability.
Standard:
|
NO.
|
Standard description
|
|
ASTM D 1238-13
|
<<Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer>>
|
|
ISO 1133：2005
|
<<Plastics-Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics>>
|
parameters:
|
Model
|
MFI-1211
|
|
Test method
|
MFR
|
|
Display mode
|
LCD
|
|
Cutting mode
|
Automatic cutting
|
|
Flow rate measuring range
|
0.1～100g/10min 0.01～350m³/10min
|
|
Temperature range
|
100℃～450℃
|
|
Temperature accuracy
|
±0.5℃
|
|
Temperature resolution
|
0.1℃
|
|
Heating time
|
＜30min
|
|
Temperature recovery time
|
＜4 min
|
|
Weight loading
|
Manually
|
|
Time accuracy
|
0.01s
|
|
Power supply
|
（220-15％～220+10％ ）VAC 50Hz 500W, single phase and three wires
|